Resource Library

BMW Motorrad

By automating the crankshaft modeling process using Altair SimLab, BMW Motorrad, the motorcycle division of BMW was able to significantly reduce their model creation time, and enable accuracy in budgetary forecasting and planning. As a result of m...

Customer Stories

Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

See how Altair Feko helped reduce heat during MRI procedures in DBS implants.

Customer Stories

Imperial Auto has Successfully Validated the Contact Pressure for O-Ring by Contact Analysis using Altair OptiStruct™ Solution

Established in the year 1969, Imperial Auto is one of the biggest integrated manufacturers of ‘Fluid Transmission Products (FTPs) in the world. The company has eight dedicated manufacturing and assembly plants in India. The grand vision of the com...

Customer Stories

Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

With over 2 decades of experience in manufacturing Aluminum Heat-exchangers such as Condensers, Evaporators, Heaters, Radiators, Oil Coolers, IHX and Roof AC units, Pranav Vikas (India) Private Limited (PVL) today is one of the largest and most di...

Customer Stories

Museo de Arte de Lima

In 2016, international architectural design firm Zaha Hadid Architects (ZHA) participated in a design competition launched by the internationally renowned Lima Art Museum (MALI) for the addition of a new building as a contemporary art wing of the ...

Customer Stories

Andron Handling

Andron Handling needed to assess the strength of the welded fabrication and vertical clamping arms for both lifting and clamping loads. In previous analysis of this type in Altair SimSolid™, they would have removed the wheels from the model and ap...

Customer Stories

Infinity BI powered by Altair SmartSight

Infinity.BI is a powerful business analytics module developed by Altair in partnership with Advanced Utility Systems for CIS Infinity® customers.

Through a direct integration of Altair’s business intelligence software with the Infinity database schema, this business analytics module provides a r

Customer Stories

Success Story: SUNGJIN FO-MA Uses AFDEX to Improve Quality & Productivity of Automobile Component Precision Forgings

SUNGJIN FO-MA Inc. believes in constant and strategic innovation for achieving sustainable growth. As a global company specialized in cold forging, customer satisfaction is the top most priority.

Customer Stories

Novum: University of Michigan Participates in Solar Car Challenges Around the World

See how Altair's Software is used to get University of Michigan's solar car, Novum, to the next level to compete in the World Solar Challenge in Australia and the American Solar Challenge - crossing an entire continent in both cases just on the po...

Customer Stories, Video Testimonials

Alpla Develops Innovative Packaging Solutions with HyperWorks

Alpla develops and produces packaging solutions for consumer goods. Christoph Plankel, Head of Modeling and Simulation Department at Alphla, discusses how they have used simulation to produce lighter packaging without compromising on performance.

Customer Stories, Video Testimonials

Wisconsin Precision Casting Corporation

Wisconsin Precision Casting Corporation, an investment casting manufacturer utilized Altair Inspire and Altair Click2Cast for a design study that focused on the redesign of a regenerative turbine pump cover.

Customer Stories

No more Gone with the Wind – Pedestrian Comfort Improvements on Quinta Torre with AcuSolve Computational Fluid Dynamics

Officially known as the Caleido project, the Fifth Tower in Madrid is owned by Inmobiliaria Espacio, a company that, among other services, deals with infrastructure and construction for all types of buildings.

Customer Stories

Developing More Accurate and Reliable Vehicle Component Models in Less Time with Software Automation at Changan Automobile

Pre-processing vehicle models is time consuming and complex, with many opportunities for error if done manually. Altair build a custom software solution to automate most of the pre-processing tasks.

Customer Stories

Using Altair FEKO to Facilitate Development of the World's Smallest TV Antenna

Dr. Margarita Tecpoyotl-Torres leads a team of students and researchers at The Center for Research in Engineering and Applied Sciences (CIICAp) at UAEM. They use FEKO for simulation technology in the design and development small, low cost, lightwe...

Customer Stories

APEL Extrusions

APEL Extrusions employs die extrusion simulation software to test die extrusion performance. This allows APEL to greatly speed up the design process and test multiple simulations per week.

Customer Stories

Benefits of the Symbiosis of Topology Optimization and Additive Manufacturing in Architecture

The challenge was to investigate the potential offered by the symbiosis of topology optimization and additive manufacturing for architectural projects. The Altair solution included the use of the HyperWorks suite, especially OptiStruct for optimiz...

Customer Stories

Case Study: Ensuring Success of Marine Operations in Tidal Energy

Installation analysis of OpenHydro turbine using ProteusDS.

Customer Stories

Sintavia

Sintavia utilized Altair Inspire to prove the ability to additively manufacture optimized aerospace replacement parts that exceed existing part performance while decreasing
the overall weight.

Customer Stories

Mabe

The consumer goods industry is fast paced and highly competitive, with designs becoming increasingly complex while the timeline for production shrinks. Companies like Mabe must innovate and develop new products quickly in order to remain on the co...

Customer Stories

A Vision of Tomorrow's Architechture: Designing the LAVA Bionic Tower

Exploring design variants with OptiStruct's FE-based topology optimization to generate a free-form exoskeleton structure

Customer Stories

HyperWorks Becomes Part of Mechanical Engineering Curriculum at Dalhousie University

As a key industry tool, HyperWorks becomes part of the Curriculum, providing hands-on training to Mechanical Engineering Students at Dal

Customer Stories

Implementing CAE into the Design Process for Composite Tennis Racquets at Wilson Sporting Goods

Wilson Labs, the innovation hub at Wilson Sporting Goods, leveraged OptiStruct and Altair ProductDesign for composites finite element analysis to reduce design cycle time and enhance product value.

Customer Stories

Structural Design of Concrete Shells in Seismic Areas Using HyperWorks

Challenge: Structural optimization to design expressive structures that can safely
be employed in seismic areas

Altair Solution: Investigate shell structures

Customer Stories

Student Racing Team from Politecnico di Torino uses HyperWorks to Improve Weight, Manufacturability, and the Performance of Race Car

The students used HyperWorks which resulted in a weight reduction of 30% for those parts that were taken under consideration.

Customer Stories

Student Team H2polit0 of Politecnico of Torino Applied HyperWorks to Reduce Vehicle Weight and Fuel Consumption on Shell Eco Marathon Europe Competition

Student teams from around the world participate in the Shell Eco-marathon (SEM), a unique low energy consumption competition for student teams. Within the competition the teams strive to design, build and drive the most energy-efficient car. In th...

Customer Stories

Climbing the Winner’s Podium with HyperWorks

HyperWorks allows for the option to increase the stiffness of the wheel shell through the use of OptiStruct. By applying HyperWorks to
their composite design and development process the team was able to increase the stiffness of the chosen components by 10 percent while learning how to do a structu

Customer Stories

Re-Loc

Re-Loc is a UK based company that developed a new product to help to accelerate the process of positioning metal reinforcement bars inside concrete bricks. The Re-Loc product is a clip that fits tightly inside the brick’s cavity and attaches to th...

Customer Stories

Combining topology optimization with laser additive manufacturing reveals new potential for lightweight structures

Challenge: Development of design and optimization methods to improve components made with laser additive manufacturing methods.

Altair Solution: HyperWorks, OptiStruct, Simulation Driven Design Process

Benefits: increased material efficiency, lighter and stiffer structures, less user training

Customer Stories

Luxon Engineering Applies Optimization-driven Design to Motocross Components

The motorcycles used in motocross racing demand light weight and high strength components in order to gain a performance advantage over the competition. In this video testimonial Billy Wight, President of Luxon Engineering, presents a case study o...

Customer Stories, Video Testimonials

HardMarque

HardMarque coupled topology optimization with additive manufacturing to conceptualize and refine the design of a piston. The final piston design is 23.5% lighter than the original design. 

Customer Stories

SEGULA Technologies optimizes its enterprise IT investment using Altair’s software asset optimization solution

Industry
Engineering Service Provider

Challenge
Need to handle and monitor a very large variety of commercial software licenses and to optimize the software usage.

Altair Solution
License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution,

Customer Stories

Race Face

Race Face redesigned a bicycle crank using generative design and finite element analysis. The concept design process yielded a part with increased stiffness and strength without increasing the weight of the part.

Customer Stories

HyperWorks, especially OptiStruct is one of the central tools supporting the CAE efforts of BASF Engineering Plastics

Mathematical optimisation methods can provide significant support in virtual CAE part development. In the early phases of the project topology optimisation affords valuable clues to the design of the geometry of the part.

Customer Stories

The Art of Packaging to Protect Cultural Assets

Simulation tools isolate the cause of
undesirable shipping loads on museum’s
cultural treasures.

Customer Stories

HyperWorks in the Development of Aeronautic Sensors

Esterline Advanced Sensors offers its customers a broad range of high precision solutions for aeronautics (cockpit, airframe and engine) and derivative products for marine, defense and the industrial sector. Read the Case Study to see how HyperMe...

Customer Stories

Structural Optimization Helps Launch Space Payloads

Aerospace company employs simulation software to reduce weight in the Launch Abort Manifold for the Orion Multi-Purpose Crew Vehicle.

By Blaine E. Phipps, Michael H. Young and Nathan G. Christensen
Concept To Reality Summer/Fall 2011

Customer Stories

HyperWorks Improves Development Processes in Automotive Industry

In 2008 PWO Germany (Progress-Werk Oberkirch AG) had to develop and produce a new steel made automotive cross car beam (CCB) for the dash board of a new car. PWO received the CAD model, the design space definition and other pre-defined standards o...

Customer Stories

Simulation and Analysis Investments Help Drive PLM Market Growth

The need to improve designs and reduce the cost of prototyping is fueling increased investments in simulation and analysis tools.

Customer Stories

HyperWorks Helps to Develop Race-Winning Yacht for Volvo Ocean Race 2009

The CAE suite HyperWorks has been used by ABstructures to structurally design and optimize the winning yacht in the Volvo Ocean Race, Ericsson 4. The yacht, skippered by Torben Grael, claimed victory in the Volvo Ocean Race on June 27, 2009 in St....

Customer Stories

PBS Professional at GE's Oil & Gas Business: Putting an Engineering Cluster to Work

Next time you stop to fill your fuel tank, reflect on the fact that a company on the sunny slopes of Tuscany may have helped to make it possible. Nuovo Pignone, now a key technological component of GE's Oil & Gas business, began life 100 years ago...

Customer Stories
374 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!